Make a Skeleton That Doesn't Suck!
Below are step-by-step
instructions for building a skeleton that doesn't suck. (OK, it's really
more of a corpse by the time you're done with it. In any event, it will
suck less than when you bought it for $8.00.) It's based on
the one at www.Spookyblue.com.
Click on an image below for a larger view. I didn't take a lot of
pictures when I did this project so these are not complete instructions.
For more info, check out the www.spookyblue.com
link.
|
|
|
|
Step 1
Get a cheap plastic skeleton from Wal-Mart (This one is lying on top of some junk. Just ignore it.) |
|
|
|
Step 2
Cover it with carpet adhesive and paper towels/newspaper. You can also use duct or masking tape where necessary. Note that I cut out his eyes. (Ouch!) |
|
|
|
Step 3
Make recesses where the eyes were from paper towels and carpet adhesive. Once the adhesive dries, color the whole thing with a variety of wood stains. |
|
|
Home | Scarecrow | Skeleton
This site was last updated
04/13/07
|
